|
order No | in use | description | rental |
---|---|---|---|
INo 8166 | 1700-1950 | Carpenters hammer, spliced upper edge with 2 different long points, head 14cm and hand forged, 17th - 19th century, short handle of 22cm (certainly added later), 400gr, from pipe fitters shop deutsche Übersetzung | 10 € |
INo 11151 | 1910-1960 | Small hammer combination, all-metal construction, the hammerhead has a small hatchet on the other end and can be screwed off, in the handle is a chamber, which contains 4 different screw-driver blades and a small drill, which can be fixed to the handle deutsche Übersetzung | 15 € |
INo 11152 | 1910-1960 | Small hammer combination, all-metal construction, the hammerhead has a nail-claw on the other end, the hilt can be screwed apart in 4 in-each-other resting screw-drivers from very tiny to regular size, altogether 20x7x2cm big deutsche Übersetzung | 15 € |
INo 11724 | 1910-1960 | Small hammer combination, wooden hollow grip with metal-mount for hammerhead and blades, in the grip a countersink, a screw-driver and a chisel that can be fixed to the grip instead of the hammerhead, 18x8x1.5cm deutsche Übersetzung | 15 € |
INo 7869 | 1700-1960 | Setting up hammer with square copper head, 26cm stick, around 1940 but locking older, from a pipe maker's shop, used condition deutsche Übersetzung | 10 € |
INo 8008 | 1700-1960 | Old pipe fitters forcing hammer, one hammerside cone frustum shaped, 22cm long wooden stick, head 15cm and 800 gr deutsche Übersetzung | 10 € |
INo 8021 | 1700-1960 | Forcing hammer from a pipe maker, both ends of head ball-shaped, one side 33mm, other 40mm, oval 33cm long wooden handle, head l=19cm, 1200g deutsche Übersetzung | 10 € |
INo 8022 | 1700-1960 | Single head forcing-hammer of a pipe-fitter shop around 1900-1920, ball-head with 29cm long handle, 600gr, dark-brown patina deutsche Übersetzung | 10 € |
INo 8310 | 1900-1970 | Big lockmakers hammer, 600g, 32cm wooden grip, dull iron head, around 1930/70, used by pipe maker deutsche Übersetzung | 8 € |
INo 8047 | 1700-1960 | Pipemaker's forging hammer, both sides halfball shaped heads, 22/26mm, oval 30cm long stick handle, 600g, dark surface, around 1940 deutsche Übersetzung | 10 € |
INo 8056 | 1700-1960 | German driving hammer of a pipe maker's shop, head both ends half-ballshaped, 35mm/40mm, oval 28cm long stick-handle, head 20cm wide, 1200 gr. deutsche Übersetzung | 10 € |
INo 8102 | 1800-1970 | Locksmith-hammer, 1000gr head with sharp-edge one side, 30cm long handle, dark surface, around 1930-50 from pipe-fitter shop deutsche Übersetzung | 8 € |
INo 8103 | 1800-1970 | Old locksmith hammer with 400 g head, marked 'Gussstahl Aug. Eschelbach' (casted steel), 30cm stick handle, dark patina, around 1930/50, from pipe fitters shop deutsche Übersetzung | 8 € |
INo 7897 | 1700-1960 | Old pipe fitters hammer, for grooving tin one side 16mm other 13mm wide, 28cm stick handle, around 1940 deutsche Übersetzung | 10 € |
INo 7940 | 1800-1970 | Old pipe fitters hammer for forging sheet metal, head one side half ball the other square, 28cm stick, 400g, around 1900/1930 deutsche Übersetzung | 10 € |
INo 8191 | 1800-1970 | Finishing hammer from a pipe fitter shop, square body with half-ball head on one side, simple wooden stick, 400gr, around 1900/1930 deutsche Übersetzung | 10 € |
INo 7938 | 1800-1970 | Single sided pipe-fitter's hammer, square iron body that opens like a mushroom to a circular impact plate, 23cm wooden stick, dull patina deutsche Übersetzung | 10 € |
INo 8009 | 1700-1960 | Hammer from a pipemaker's shop, both head both sides with wedge shaped edges, 26cm long wodden handle, head 10cm, around 1940 deutsche Übersetzung | 10 € |
INo 3828 | 1600-1950 | Wooden hammer, around 1930, edged head 12.5x6x6cm with turned 32cm long grip, used condition deutsche Übersetzung | 15 € |
INo 8057 | 1950-1960 | Mallet of turned wood, the head fixed on the handle with 2 brackets of aluminium, marked 'Simplex 30', around 1950, head heavily used, stick 24cm, d of head 7.5cm, from pipe fitters shop deutsche Übersetzung | 8 € |
INo 7890 | 1700-1960 | Mallet of turned wood, d of head 65mm, 29cm long stick handle, from pipe fitter shop around 1940 but looking older, used condition deutsche Übersetzung | 8 € |
INo 7867 | 1700-1960 | Mallet, made of turned wood, head d=65mm, with 30cm long handle, around 1940 but looking older, from a plumber workshop deutsche Übersetzung | 8 € |
INo 7868 | 1700-1960 | Wooden hammer, turner's work, head mounted with an iron belt, stick handle 25cm, around 1940 but looking older, from a pipe maker's shop deutsche Übersetzung | 8 € |
INo 7896 | 1700-1960 | Wooden hammer, cylindrical head d=55mm, in its middle wide metal belt, 17cm long stick handle, around 1940 but looking older, from pipe fitter's shop deutsche Übersetzung | 8 € |
INo 7937 | 1700-1960 | Wooden hammer, made by a turner, barrel-shaped head with 7cm diameter, 26cm long handle, around 1940 but looking older, traces of use, from a pipe-fitter-shop deutsche Übersetzung | 8 € |
INo 1487 | 1600-1950 | Hefty wooden hammer, edged oak-wood block 15x11x8cm with raw 20cm stick handle, used condition deutsche Übersetzung | 15 € |
INo 5286 | 1800-1920 | Small hand drill with wooden lock, around 1910 or earlier, lenght 23cm, lock 14.5cm deutsche Übersetzung | 10 € |
INo 14121 | 1860-1950 | Saddle makers leatherstrap cutter, massiv brass slide with mounted knife, left side ruler for adjusting width of strap/belt, right pressing roller, made 'Blanchard Paris around 1860-1910, w=22cm, l=20.5cm, h=10cm, 805g deutsche Übersetzung | 25 € |
INo 3023 | 1700-1900 | Double sided marker of wood, around 1900, 9x2.5x24cm, good condition with traces of use deutsche Übersetzung | 25 € |
INo 3776 | 1700-1900 | Double sided wooden joiners marker, around 1900, 10x2.5x18.5c,. good condition with traces of use deutsche Übersetzung | 25 € |
INo 1147 | 1700-1900 | French joiners measure around 1850, folded wooden stick, that can be used for measuring, as slide calliper and rim-marker, stamped 'Rasche Metre', good condition deutsche Übersetzung | 25 € |
INo 7172 | 1900-1960 | 10m measuring tape of white linen, front-end substituted by 18cm of German WW2 army coloured leather, in disc-shaped box with crankshaft, leather with brass applications, on it's side 'Metallic Wetterfest', d=10.5cm, tape 35mm wide deutsche Übersetzung | 10 € |
INo 15086 | 1880-1950 | Mining engineers spike hammer, was used for walking in the mines and for proving the wood constructions, Germany, probably Westfalen area around 1880, good condition with aged patina deutsche Übersetzung | 25 € |
INo 7412 | 0010-1960 | Wooden mould for glass blowing, pattern for a 16cm height ballshaped vase with funnel opening, made of 4 pieces of oak, one side with hinge to open it, 17x15x20cm, 3kg, carved in '5478 18', good condition deutsche Übersetzung | 15 € |
INo 8425 | 1900-1960 | Oil can 'Pressol Spezial 4', lever operated conical flat can with thin tube tip, h022cm, dull surface, around 1930/40 deutsche Übersetzung | 8 € |
| |||
INo 8689 | 1900-1960 | Oil can, cylindrical conical tank with oiler hose on top, on the side lever to spray the oil, aluminium, marked 'ReiLang', h=32cm, dark surface, around 1930/40 deutsche Übersetzung | 8 € |
INo 15232 | 1942-1955 | German WW2 pioneer's pikeaxe, head 35cm, total 66cm, 1.7kg, dull steel, stick with some old wood worm holes but tight, stamped 1936 deutsche Übersetzung | 30 € |
INo 5287 | 1800-1950 | Standard wooden plane, around 1900/1920, foot 24cm, width 6cm, h=6.6/14cm, good condition deutsche Übersetzung | 10 € |
INo 3602 | 1700-1900 | Small handcrafted pliers, probably 17th/18th century, dark surface, good condition with ageing, 15x3x2cm deutsche Übersetzung | 15 € |
INo 8192 | 1930-1980 | Big waterpump pliers with adjustable grip, stamped 'D.R.G.M. ', around 1940, brown patina, heavily used, l=40cm, 1400gr deutsche Übersetzung | 10 € |
INo 3983 | 1946-1960 | Small mason's plumb, German post WW2 production from delaborated 2cm anti aircraft cannon balls, bottom with fixed thread loop, stamped '14-4' deutsche Übersetzung | 20 € |
INo 1193 | 1850-1930 | Pricker from a saddlemaker's shop, turned wooden handle with collet and needle, around 1860 - 1900 deutsche Übersetzung | 10 € |
INo 14577 | 1880-1950 | Pricker from a saddlemaker's shop, turned wooden handle with reel-frame and reel for thread, needle top, around 1930, l=20.5cm, 134g, traces of age deutsche Übersetzung | 10 € |
INo 9210 | 1920-1960 | Pair of wooden shoe trees of massive beech wood, for flat man's shoes size 40, length 26cm, around 1930/40, good condition deutsche Übersetzung | 15 € |
INo 3601 | 1900-1950 | Iron saw, around 1940, frame with draw back bolt and wooden handle, good condition, 52x12.5cm deutsche Übersetzung | 10 € |
INo 8325 | 1900-1950 | Iron saw, steel bow with wooden handle, with double sided saw blade, brown surface, 52x11cm, around 1940 deutsche Übersetzung | 10 € |
INo 1280 | 1700-1950 | Old frame saw, handcrafted around 1900, double T-construction of wood, one open edge saw blade, other spanning wire, 87x38x4cm deutsche Übersetzung | 20 € |
INo 15117 | 1942-1955 | German WW2 pioneer's handsaw, pressed steel handle, still very sharp 53cm long steel blade, dull surface, no stamps or manufacturer marks deutsche Übersetzung | 20 € |
INo 8104 | 1900-1950 | Old trunk saw, metal bow with wooden grips on both ends, between the ends a raw sawing blade, metal stained, 41x15cm, around 1900/1920 deutsche Übersetzung | 10 € |
INo 10379 | 1930-1950 | Simple bow-saw, metal-tube bow with wooden grips on each side, spanned raw saw-blade, dark aged, around 1940/50, 90x33cm deutsche Übersetzung | 10 € |
INo 5280 | 1860-1920 | Wooden screw clamp from a joiners shop around 1910, opens up to 22cm, size 50x22.5x5.5cm, back edge iron enforced, screw bolt missing last 15cm of tip deutsche Übersetzung | 15 € |
INo 4956 | 1700-1900 | German wooden screw clamp from a joiner's shop of around 1910, openes 20cm, size 42x22x5cm, good condition with repair deutsche Übersetzung | 15 € |
2 pieces available INo 5279 | 1860-1920 | Big wooden screw clamp from a joiner's shop around 1910, opens to 22.5cm, size 50x23x5.5cm, rear angles metal enforced deutsche Übersetzung | 20 € |
INo 13224 | 1960-1970 | Screw driver with blue plastic grip, exchangeable blades, hollow grip for battery and extra blades, hilt with small built in flashlight, typical 1960/70th design, on it ad of the Eduard Loose Co Gießen deutsche Übersetzung | 10 € |
INo 3794 | 1920-1940 | Medium size screw driver from around 1930, turned wooden handle and short wide blade, length 13.5cm deutsche Übersetzung | 10 € |
INo 3793 | 1850-1930 | Small screw driver with turned wooden handle and slim blade, around 1910, 8.7cm deutsche Übersetzung | 10 € |
INo 4016 | 1900-1940 | Old screw driver with exchangeable tips, 15cm long hollow wooden grip, in grip exchange tips 2 screws drivers, 2 drills and 2 chisel, around 1910 deutsche Übersetzung | 10 € |
INo 5155 | 1900-1960 | Big screwdriver with wooden grip, around 1910, metal brown patina deutsche Übersetzung | 10 € |
INo 5213 | 1400-1900 | Handmade screw driver from around 1800, single piece construction, l=25cm deutsche Übersetzung | 12 € |
INo 7105 | 1600-1950 | Old vice, screw terminal, fixing holes on one jaw, the 2 jaws on long iron rods, that are hinged together on their ends, in its middle locking bolt, head 10x25/35x38cm with rods 95cm, 16kg deutsche Übersetzung | 30 € |
2 pieces available INo 8316 | 1930-1950 | Medium size screw driver, full length blade, grip of turned wood, hilt with nutprofile for 10mm wrench, around 1940/60 deutsche Übersetzung | 8 € |
INo 13645 | 1930-1950 | Patent screwdiver by 'Mahle' around 1940, probably belonging to weapon, 4 different blades can be slided out of handle, high quality steel, closed 10.5cm, good condition deutsche Übersetzung | 10 € |
INo 14205 | 1935-1950 | Medium size screw driver, flat blade, grip of turned wood, on blade German WW2 acceptance mark, around 1940, tool belonging to vehicle or gun, dull steel but no scrores deutsche Übersetzung | 10 € |
INo 13371 | 1960-1970 | Patent screw driver, orange transparent plastic grip with compartment for 6 different tips, pushing the grip turns blade, can be fixed or switched to left or right turning, around 1965 deutsche Übersetzung | 10 € |
INo 13565 | 1895-1960 | Drill operated screwdriver, pressing and pulling of handle turns blade left or right, inscription 'Yankee No 30 - North Bros. Mfg.Co - Phila. PA, U.S.A. - Pat.Apr.16.95 Nov.2.97 - Sept.15.99 Oct.9.00, l=35/48cm, good condition deutsche Übersetzung | 10 € |
INo 13563 | 1900-1960 | Big both hand operated screwdriver with long wooden grip, around 1910 or older, handcrafted blade and turned wooden grip, metal brown patina and grip cracked, possibly special issue for a destined machine, l=41cm, 220g deutsche Übersetzung | 10 € |
INo 93 | 1948-1960 | Small brush of a shoemaker or saddler shop, aluminiumband with short stealbristles, produced about 1948 deutsche Übersetzung | 5 € |
INo 5285 | 1946-1950 | Wooden shoe tree for flat lady's shoe, built of 3 layers of boards, metal floor plate, length 27cm, around 1946/48 deutsche Übersetzung | 12 € |
INo 4740 | 1880-1960 | Iron tripot from a shoemaker, size '2', 20x20x20cm, 4kg, around 1910 deutsche Übersetzung | 20 € |
INo 1574 | 1850-1950 | Middle size soldiering iron, handsmithed iron stick with riveted on wooden grip, frontring with inset cone copper soldier head stamped size 6, mid 19th century, 31x8.5x1.7cm, 300gr, grip with wormholes deutsche Übersetzung | 12 € |
|