homepage
rental-offer on the subject "working" - issue Tuesday , November 29th, 2016
2531 objects keywords absence to zirkelprofilm.de, Horst
Decker GbR,
Kirchbergstr.37, D-63691
Ranstadt (40km north of Frankfurt/Main),
Phone: 00496035-921685, Phone/Fax:00496035-1403, St.ID.:81 438 072 592, USt.-Nr. DE - 2258749
|
| order No | in use | description | rental |
|---|---|---|---|
INo 1275 | 1900-1950 | Schreibtischablage für Federhalter, um 1910/20, schwarz lackierter Holzsockel 13x15x4.5cm, vorn wannenförmige Federhalterrinne, hinten großes gläsernes Tintenfaß m. Federhaltereinsatz, Messingfassung u.halbkugelförmiger, versenkbarer Messing-Klappdeck not yet translated into English | 30 € |
INo 3279 | 1900-1950 | Schreibtischablage, um 1920/30, völlig aus Holz geschnitzt/verleimt, Ablage Blattform, an Hinterkante kleines Berghaus, dessen Dach nach hinten wegklappbar, darunter Tintenglas, rückseitig 'Berchtesgaden', 20x12x8cm, vorn rechts fehlt Holzstab not yet translated into English | 20 € |
INo 3072 | 1940-1960 | Dies shaped ink pot of glass, 'Pelikan Füllhalter Tinte Königsblau', typical school ink of the 1950th/60th, bottom stamped '61 II', dark blue screw lid with pelican deutsche Übersetzung | 8 € |
INo 3529 | 1935-1945 | Tintenlöscher, hergestellt um 1940, Handabroller aus schwarzem Bakelit, 7cm breite und 7cm dicke Löschpapierrolle, auf dem Gehäuse Typenbezeichnung 'Graf Bluco - Favorit - DRGM', guter Zustand not yet translated into English | 10 € |
INo 3695 | 1900-1960 | Wooden cigar mould for 20 cigars, colourful face showing 2 Indian chiefs with crest in front of harbour scene, 'Non plus ultra - Fabrica de Tabacos', with anniversary label 'G.M. Holz Zigarren 1849 - 1949', like new deutsche Übersetzung | 20 € |
INo 509 | 1948-1960 | Tobacco cutting device of the German post WW2 period, professional casted of aluminium trash of WW2 vehicles and planes, typical raw casting with hand-filing marks, open mould for tobacco-leaves, on its end cutting-lever, 14x10/22x7cm deutsche Übersetzung | 15 € |
INo 175 | 1948-1960 | Tobacco cutter, small bench with metal mould and crankshaft, spindle presses the tobacco leaves, on the end of bench cutting-knife, made around 1948 of trash metal from WW2, after WW2 many German families produced their own tobacco deutsche Übersetzung | 15 € |
INo 176 | 1948-1960 | Tobacco cutting bench with spindle, casted aluminium-tube as housing and with table clamp, on its front cutting knife, professional manufactured around 1948, stamped 'G.F.', many German families produced their own tobacco after WW2, due to no money deutsche Übersetzung | 15 € |
INo 357 | 1948-1960 | Tobacco-cutter, German post WW2 product, casted aluminium housing with typical rough surface with file-marks, crankshaft presses and moves leaves and operates a cutting-device deutsche Übersetzung | 15 € |
INo 510 | 1948-1960 | German post WW2 tobacco-cutter, the housing of professional make, on its front lever with blade, top an open mould, 10x8/21x9cm deutsche Übersetzung | 15 € |
INo 600 | 1946-1960 | Big commercial tobacco-cutting bench around 1946/47, wooden trough 50x15x7cm, front with mounted flywheel and crankshaft serving 2 support-wheels and a cutter, possibly built using a small camshaft of an aircraft engine deutsche Übersetzung | 40 € |
INo 4807 | 1945-1960 | German post WW2 period tobacco cutting device, made around 1945/46 of the body of a 47mm diamiter German airforce mine, marked WaA839, fieldgrey varnish, good condition deutsche Übersetzung | 25 € |
INo 14668 | 1945-1960 | German post WW2 period tobacco cutting device, made around 1945/46 of the body of an unidentified WW2 equipment part, tube d=4.5cm, l=18cm, table clamp, knife and press, 23x31x8cm, 1.5kg, very good deutsche Übersetzung | 25 € |
INo 9007 | 1948-1960 | Device for cutting tobacco-leaves in cigarette-tobacco, made in the German post-war period 1948-1950, wooden board with blue varnished iron, 14x9.5x22cm deutsche Übersetzung | 15 € |
INo 7861 | 1920-1950 | Mechanical breast drill, gearbox with crankshaft, drill chuck and breast plate, around 1920/30, 41cm long and 2.3kg weight, good condition deutsche Übersetzung | 20 € |
INo 7860 | 1910-1950 | Mechanicle drilling machine, gearbox with crankshaft, back with wooden breast plate, front with drill chuck, with a tip for drilling stone, around 1920, l=40cm, 1.2kg, good condition deutsche Übersetzung | 20 € |
INo 1575 | 1850-1950 | Old handcrafted soldiering iron, copper head with 33cm long handle, heavy used, 19th century, 33x5x2cm, 200 g deutsche Übersetzung | 12 € |
INo 2650 | 1900-1960 | Wooden angle gauge from a joiner's shop around 1930/40, fixed 45/135 degree angle, 40x15.5cm deutsche Übersetzung | 12 € |
INo 3777 | 1500-1920 | Small wooden 90° angle, around 1880, 19x10cm, good condition deutsche Übersetzung | 15 € |
INo 7802 | 1700-1980 | Slim pipe-fitter anvil, around 1900 or older, heavy oak-socket (d=46cm h=55cm weight 80kg), in it 4 4-edges-holes for a slim anvil with long thin horns, altogether w=88cm, used and aged condition deutsche Übersetzung | 50 € |
INo 11697 | 1910-1950 | Small German combinationtool for Army fireworkers, pliers with hammer and hatchet-head, with wire-cutter, screw-driver and nail-lifter, all forged 2-piece construction, dark patina, stamped in German 'steel', size 16x10x1.5cm deutsche Übersetzung | 20 € |
INo 12887 | 1800-2007 | Mallet, auction or court hammer, made of turned wood, head d=70mm, with 25cm long handle, 300gr deutsche Übersetzung | 15 € |
INo 1923 | 1880-1950 | Big handsmithed mining axe, half moon shaped blade with point top 36x22cm, 70cm long stick, around 1850/1880, stick renewed deutsche Übersetzung | 25 € |
INo 1242 | 1850-1950 | Small wooden bevel from a joiner's shop, fold open like a pocket knife, for copying angles, around 1900, folded 24x2.4x1.8cm deutsche Übersetzung | 20 € |
INo 9168 | 1900-1960 | Tip from blow lamp for soldering, rectangular bent iron stick with fitted in copper head with point, ca. 19cm 400 g, around 1940th deutsche Übersetzung | 6 € |
INo 8068 | 1700-1960 | Heavy brand iron to mark wooden property, handsmithed 62cm rod with ring-handle, tip with block 15x3x4cm with big letters 'G. Ganss', 2.4kg, around 17-- - 1850 deutsche Übersetzung | 25 € |
INo 8067 | 1900-1960 | Small brand iron for marking wooden property, 26cm stick with loop at rear end, front with iron block 6x2x2cm, face of block with big embossed letters 'H.Sch.', 22gr, around 1930/40 deutsche Übersetzung | 15 € |
INo 13052 | 1880-1920 | Adjustable open end British wrench, 2-pieces construction, sliding in each other, with adjustable nut, around 1950, good condition, length 16cm, around 300grams deutsche Übersetzung | 10 € |
INo 3826 | 1880-1920 | Adjustable British wrench, marked 'Moniex', sloping jaws and threaded bold to adjust width, flat handle with forged lever end, around 1910 deutsche Übersetzung | 10 € |
INo 7570 | 1880-1920 | Adjustable wrench, British wrench, hammer-head, opposite adjustable brackets, metal grip, marked 'HD 1E', around 1910 deutsche Übersetzung | 10 € |
INo 12149 | 1700-1980 | Heavy wooden trunk-disk with 3 wooden legs and iron-braces, diameter of trunk 38cm and thickness 17cm, total height 83cm, weight 14kg deutsche Übersetzung | 40 € |
INo 8015 | 1700-1980 | Heavy wooden trunk-disk with 3 wooden legs and iron-braces, around 1900, diameter of trunk 41cm and thickness 30cm, total height 73cm, w=32kg deutsche Übersetzung | 40 € |
INo 4139 | 1860-1920 | Callipers to measure outer diameters, possibly for turners, around 1860-1900, forged of one piece spring-steel, curved legs and head as omega-spring, middle fixed adjustable screw, old dark patina, good condition, l=13cm deutsche Übersetzung | 15 € |
INo 2167 | 1870-1920 | French calliper rule, about 1900 or before, window-body of massive brass, length 16cm, good condition with traces of age deutsche Übersetzung | 20 € |
INo 6718 | 1800-1950 | Chisel, one piece stell construction, 1,3mm blade, probably for engraving deutsche Übersetzung | 8 € |
|
| |||
INo 6716 | 1800-1950 | Chisel for cutting wood for double line decoration, from joiner around 1900, 3cm width and 23cm length, stamped 'DRGM 17 1/2' deutsche Übersetzung | 10 € |
INo 3603 | 1800-1950 | German chisel for wood with shaft of bigger twig, blade dark brown, stampes 'Kirschenwerk xxxx 1858', around 1900, used condition deutsche Übersetzung | 10 € |
INo 6717 | 1860-1950 | Circle cutter, probably joiners tool around 1900, compass with cm grading up to 20cm, end of it a cutting blade, centre with wooden grip, 27x18x2.5cm deutsche Übersetzung | 10 € |
3 pieces available INo 8190 | 1920-1955 | Construction clamp of iron, German post WW2 periode and handsmithed by using an old horse-shoe as raw material, 28cm length with 5cm long pikes, dull iron deutsche Übersetzung | 10 € |
INo 13223 | 1935-1950 | Small German combinationtool for Army fireworkers, pliers with hammer and hatchet-head, with wire-cutter, screw-driver and nail-lifter, all forged 2-piece construction, dark patina, stamped in German 'Army property', size 16x10x1.5cm deutsche Übersetzung | 20 € |
INo 9166 | 1800-1950 | Simple made drill, crankshaft of iron, tip with clamp for drill-tips, top and crankshaft-center with wooden knop, 19th century, around 29x14cm, incl. a tip deutsche Übersetzung | 30 € |
INo 12691 | 1860-1950 | Simple drilling winch from around 1900, cranked iron shaft with grips of hardwood, 34x18 cm, dull surface deutsche Übersetzung | 20 € |
INo 4001 | 1900-1960 | Simple hand-drill with T-shaped loop, around 1950, like new deutsche Übersetzung | 10 € |
INo 4625 | 1840-1930 | Old drill, made of wooden handle and spiral drill of an old hand drill, about 1900, traces of old use and metal rusted deutsche Übersetzung | 10 € |
INo 10384 | 1800-1950 | Tool, drill, iron crankshaft, ratched operated chuck, knop for pressing and grip of hardwood, 37x18cm, 1kg, dull steel, around 1920 deutsche Übersetzung | 20 € |
INo 3540 | 1200-1900 | Small handsmithed drill for wood, top with T-shaped grip of stag horn, dark patina, around 1700, making a ca. 10mm hole, length 14cm deutsche Übersetzung | 20 € |
INo 7863 | 1900-1950 | Old mechanicle drilling machine, crankshaft with drill chuck and plate for pressing it on with the body, 37x21xm, 1.6kg, incl. an adjustable drill tip 0.7-35mm deutsche Übersetzung | 20 € |
INo 3823 | 1800-1930 | Handcrafted drilling-head of iron, probably from cooper to drill bungholes in wooden barrels, back smithed flat to fit in old crank-drill, l=15cm deutsche Übersetzung | 12 € |
INo 3824 | 1800-1920 | Small handcrafted spiral drill for wood, flat hammered shaft with wooden cross bar, dark surface, around 1900, drills 8mm hole, l=19cm deutsche Übersetzung | 8 € |
INo 5830 | 1800-1920 | Old carpenter's spiral drill, handsmithed 63cm long shaft with 31cm wide wooden T-handle, for 2cm wide holes deutsche Übersetzung | 12 € |
INo 9099 | 1900-1960 | Factory made spiral drill for 9mm holes, one piece steel, end bend to a D-shaped handle, total length 20cm deutsche Übersetzung | 8 € |
INo 11064 | 1900-1960 | Handcrafted spiral drill for wood, for 10mm holes, the upper end bend as D-handle, length 19cm, handle 7cm wide deutsche Übersetzung | 8 € |
INo 11673 | 1800-1930 | Drilling-head for old crank-drill, for 32mm hole, for carpenter or cabinet-maker, factory made, marked 'E.E. 15', dark surface but good condition, 19th century deutsche Übersetzung | 8 € |
INo 7862 | 1800-1950 | Simple drilling winch with ratchet and drill chuck, around 1920, top with wooden push button, crankshaft with wooden handle, 37x18cm, 1kg deutsche Übersetzung | 20 € |
INo 11629 | 1200-1900 | Simple drilling winch of the 18th century, cranked wooden shaft with iron-fitting for drill, mushroom-shaped press-knob, this kind of drills were in use since before the middle-ages, incl. iron drill-tip deutsche Übersetzung | 60 € |
INo 5282 | 1800-1910 | Small reamer for 1cm holes, pentagonal steel blade with big wooden cross bar, l=22,5cm, cross bar 17.5cm, around 1900 deutsche Übersetzung | 15 € |
INo 12704 | 1910-1950 | Small hand drill, iron stick with flat threads, top with black wood handle, tip with nut for fine drills, in the middle wooden grip, when moving it up-and-downwards, the stick turns fore- and backwards, around 1920 deutsche Übersetzung | 10 € |
INo 7859 | 1910-1950 | Mechanical hand drill, open gearbox with wooden grip and chuck, on its side toothwheel with crankshaft, around 1910, 32cm long, 650 gr, good condition deutsche Übersetzung | 20 € |
INo 3599 | 1800-1950 | Simple drilling winch of the 19th century, cranked iron shaft with eggshaped grips of hardwood, 29x13 cm, incl. 4 different handmade drills deutsche Übersetzung | 30 € |
INo 12692 | 1900-1940 | Original set of Drilling-heads for old crank-drills, 11 different pieces for 3 to 25mm holes, plus a screwdriver-tip, in belonging canvas bag 25x7cm, 1kg, dull patina deutsche Übersetzung | 40 € |
INo 7870 | 1800-1960 | Big round file, handmade, French production around 1920/40, with wooden grip, 56cm long, a little rusty deutsche Übersetzung | 8 € |
INo 8312 | 1800-1960 | Small handhold filing vice, narrow brackets, around 1900/1920, length 10.5cm, spring broken, dull surface deutsche Übersetzung | 10 € |
INo 10380 | 1910-1950 | Flanging machine with 21 different rolls, floor plate with fixing holes, 50x35x15cm, 15kg, from pipe fitters shop around 1930 deutsche Übersetzung | 35 € |
INo 3825 | 1880-1920 | French wrench, adjustable jaws, turning wooden handle opens or closes jaws, 20.5x8.2cm, around 1900 deutsche Übersetzung | 15 € |
2 pieces available INo 1443 | 1900-1940 | Unidentified tool, probably for a furrier, flat wooden handle, on its tip a horizontal roller bar with edges, brass, around 1910/20, 11x6.5x2cm deutsche Übersetzung | 10 € |
INo 8591 | 1930-1960 | Old gardening scissors around 1930/40, 21cm, dark surface but good condition, manufacturers mark 'FM' deutsche Übersetzung | 10 € |
INo 8434 | 1930-1950 | Small hobby grinding wheel from around 1930/40, table clamp with stone (5,5cm) and crankshaft drive, body blue varnished casted iron, 8x14x12cn, stamped 'Made in Germany - Wita - DRGM' deutsche Übersetzung | 10 € |
INo 10381 | 1920-1950 | Big crakshaft operated grindstone, housing of casted iron, can be adjusted in height, to be screwed on workbench, 29x18x26cm, dull surface, around 1920/40, heavily used deutsche Übersetzung | 20 € |
INo 7891 | 1700-1960 | Small hammer with cylindrical head of aluminium, 19.5cm flat stick handle, around 1940 from a pipe maker's shop, used condition deutsche Übersetzung | 10 € |
INo 8046 | 1800-1970 | Locksmith hammer, bottom with square shape, top flat conical shape, head 200g, 28cm long wooden handle, around 1930/50, from a pipe makers shop deutsche Übersetzung | 8 € |
|
| |||