|
order No | in use | description | rental |
---|---|---|---|
INo 3794 | 1920-1940 | Medium size screw driver from around 1930, turned wooden handle and short wide blade, length 13.5cm deutsche Übersetzung | 10 € |
INo 3793 | 1850-1930 | Small screw driver with turned wooden handle and slim blade, around 1910, 8.7cm deutsche Übersetzung | 10 € |
INo 4016 | 1900-1940 | Old screw driver with exchangeable tips, 15cm long hollow wooden grip, in grip exchange tips 2 screws drivers, 2 drills and 2 chisel, around 1910 deutsche Übersetzung | 10 € |
INo 5155 | 1900-1960 | Big screwdriver with wooden grip, around 1910, metal brown patina deutsche Übersetzung | 10 € |
INo 5213 | 1400-1900 | Handmade screw driver from around 1800, single piece construction, l=25cm deutsche Übersetzung | 12 € |
INo 7105 | 1600-1950 | Old vice, screw terminal, fixing holes on one jaw, the 2 jaws on long iron rods, that are hinged together on their ends, in its middle locking bolt, head 10x25/35x38cm with rods 95cm, 16kg deutsche Übersetzung | 30 € |
2 pieces available INo 8316 | 1930-1950 | Medium size screw driver, full length blade, grip of turned wood, hilt with nutprofile for 10mm wrench, around 1940/60 deutsche Übersetzung | 8 € |
INo 13645 | 1930-1950 | Patent screwdiver by 'Mahle' around 1940, probably belonging to weapon, 4 different blades can be slided out of handle, high quality steel, closed 10.5cm, good condition deutsche Übersetzung | 10 € |
INo 14205 | 1935-1950 | Medium size screw driver, flat blade, grip of turned wood, on blade German WW2 acceptance mark, around 1940, tool belonging to vehicle or gun, dull steel but no scrores deutsche Übersetzung | 10 € |
INo 13371 | 1960-1970 | Patent screw driver, orange transparent plastic grip with compartment for 6 different tips, pushing the grip turns blade, can be fixed or switched to left or right turning, around 1965 deutsche Übersetzung | 10 € |
INo 13565 | 1895-1960 | Drill operated screwdriver, pressing and pulling of handle turns blade left or right, inscription 'Yankee No 30 - North Bros. Mfg.Co - Phila. PA, U.S.A. - Pat.Apr.16.95 Nov.2.97 - Sept.15.99 Oct.9.00, l=35/48cm, good condition deutsche Übersetzung | 10 € |
INo 13563 | 1900-1960 | Big both hand operated screwdriver with long wooden grip, around 1910 or older, handcrafted blade and turned wooden grip, metal brown patina and grip cracked, possibly special issue for a destined machine, l=41cm, 220g deutsche Übersetzung | 10 € |
INo 93 | 1948-1960 | Small brush of a shoemaker or saddler shop, aluminiumband with short stealbristles, produced about 1948 deutsche Übersetzung | 5 € |
INo 5285 | 1946-1950 | Wooden shoe tree for flat lady's shoe, built of 3 layers of boards, metal floor plate, length 27cm, around 1946/48 deutsche Übersetzung | 12 € |
INo 4740 | 1880-1960 | Iron tripot from a shoemaker, size '2', 20x20x20cm, 4kg, around 1910 deutsche Übersetzung | 20 € |
INo 1574 | 1850-1950 | Middle size soldiering iron, handsmithed iron stick with riveted on wooden grip, frontring with inset cone copper soldier head stamped size 6, mid 19th century, 31x8.5x1.7cm, 300gr, grip with wormholes deutsche Übersetzung | 12 € |
INo 1576 | 1850-1950 | Smal soldering iron, metal stick with turned wooden grip, conical copper head, 19th century, 38x5x1.2cm, 180g deutsche Übersetzung | 12 € |
INo 3985 | 1880-1960 | Soldering iron with heavy horizontal copper head, 32cm long, around 1940/48, from pipe-fitter shop deutsche Übersetzung | 12 € |
INo 3986 | 1880-1960 | Old soldering iron mit conical horizontal mounted tip of copper, for using on a soldering lamp, around 1930/40, 33cm length deutsche Übersetzung | 12 € |
INo 1099 | 1960-1980 | Stickshaped gasoline operated blow lamp for soldering around 1962, cylindrical tank with hand pump, 38x5cm, by Barthel Co. deutsche Übersetzung | 15 € |
INo 8433 | 1900-1960 | Tip for a soldiering lamp, cranked iron rod, on its end a horizontal conical copper head, around 18cm length, 200 g, around 1940th deutsche Übersetzung | 6 € |
INo 14588 | 1900-1960 | Tip for a soldiering lamp, cranked iron rod, on its end a horizontal conical copper head, around 16.5cm length, 200 g, around 1940th deutsche Übersetzung | 6 € |
INo 13158 | 1900-1960 | Copper head for a soldiering lamp, iron stick with cranked mounted head, length 14cm, head l=6cm w=200g, iron stick rusty copper dull, around 1940 deutsche Übersetzung | 6 € |
INo 11037 | 1880-1950 | Small soldiering iron, thin metal rod with turned wood grip, front angled 90 degrees and fixed copper head with square section, 1880/1920, 21x4.5x1cm, 60g deutsche Übersetzung | 12 € |
INo 11038 | 1880-1950 | Old soldiering iron, medium size, iron rod with turned wooden handle, on its tip in right angle copper bolt with edge, marked '125 A', size 30x6.5x1.7cm, 250g deutsche Übersetzung | 12 € |
INo 11039 | 1880-1950 | Big soldiering iron, 40cm iron stick with turned wooden handle, top with rectangular fixed cylindrical copper head with point on front end, 40x8x2.6cm, 450 g deutsche Übersetzung | 12 € |
INo 8627 | 1930-1960 | Gasoline operated soldiering lamp by Max Siewert Sweden, model 12, can shaped tank of sheet brass, on its top burner of steel, opposite grip with cord windings and integrated air pump, 22x22x10.5cm, good condition deutsche Übersetzung | 20 € |
INo 8688 | 1900-1960 | Copper head for a soldiering lamp, iron stick with cranked mounted head, length 12cm, head l=6cm w=200g, iron stick rusty copper dull, around 1940 deutsche Übersetzung | 6 € |
INo 4536 | 1800-1920 | Short splicing tool of bone, back with square section, front turned to a conicle point, around 7x7mm, length 9.2cm, 18th century deutsche Übersetzung | 12 € |
INo 2662 | 1900-1950 | Old die stock for cutting screws, one-piece frame with 2 horns, rectangular centre with parted cutting die for thread 8-10mm, about 1900-1930, good condition with brown patina deutsche Übersetzung | 15 € |
INo 9167 | 1940-1980 | Thread cutter, die-stock with ratchet supplied long lever and round housing for adjustable cutters for sizes 1/4 to 1 1/4 inch, from pipe maker around 1960, 72x15x13cm, 7.3kg, a little aged deutsche Übersetzung | 20 € |
INo 8054 | 1700-1900 | Old handsmithed threading die, heavy box-frame, inside adjustable cutter, heavy metal bars on short sides,67x9x4cm, 3kg, dark surface, around 1800 deutsche Übersetzung | 35 € |
INo 8066 | 1700-1900 | Antique threading die from around 1800, handsmithed, big iron frame, in it 3 adjustable cutter, both ends with big levers, one used to adjust die, 94x10x4cm, 5.5kg, metal dull deutsche Übersetzung | 35 € |
INo 8654 | 1700-1900 | Old threading die from around 1850, 21x4x7cm, 3kg, inside boxframe with 5 different sized threads from 3 to 7 mm, dull steel deutsche Übersetzung | 30 € |
INo 4160 | 1940-1945 | Cubic threading die, ca. 12mm, stamped in German '1/2 War-Marine', one cutting edge a little broken out, good condition, 31x31x14mm deutsche Übersetzung | 15 € |
INo 2501 | 1900-1955 | German WW2 time tree-saw, long curved steel blade with wooden handles on both ends, 1.30m, both ends of blade red varnished, possibly fire department, labour service or army, very good condition deutsche Übersetzung | 25 € |
INo 13566 | 1910-1950 | Turn meter from around 1910/30, missing the clock, wooden handle with axle of steel, over it a 40mm diameter wheel of brass with brass mountings, for measuring turns directly on wheels, length 29.8cm, weight 740g, good condition deutsche Übersetzung | 10 € |
INo 8421 | 1880-1920 | Small hand hold vice for filing, around 1880/1920, l=13cm, width = 4.4cm, classic style, marked 'Turnus 130mm', dull surface with rests of green varnish deutsche Übersetzung | 15 € |
INo 8577 | 1880-1970 | Iron vice around 1880/1920, hinged jaws, in its middle screw with wing nut, 14.5cm length, jaws 5cm wide, brown surface deutsche Übersetzung | 15 € |
INo 13215 | 1900-1940 | Small water-level, brass tube with 3 show windows, mounted on iron rod, in tube waterglass, level from technical device from around 1920/30, good condition deutsche Übersetzung | 20 € |
INo 1171 | 1880-1930 | Small iron water-level,shaped like the prototype-meter, 30x4x3.5cm 1,4kg, grey varnished, bidirectional, possibly to adjust a heave machine or gun, in wooden box, missing the lid of box deutsche Übersetzung | 20 € |
| |||
INo 7871 | 1930-1960 | Big wooden work bench of oak, from a pipe makers shop, left holes for vice on the right holes for lever press, 196x73x66cm, around 1940 deutsche Übersetzung | 60 € |
INo 7928 | 1930-1960 | Wooden working-bench, oak, thick plate and 4 square shaped legs, front edge with metal-loops for soldiering-lamp heads, drille holes to fix a fanging-machine, 150x71x74cm, from a pipe-fitter around 1940 deutsche Übersetzung | 80 € |
INo 3000 | 1900-1920 | Adjustable wrench with wooden shaft (French Wrench), one side with hammer-head, around 1900 deutsche Übersetzung | 15 € |
INo 12685 | 1920-1950 | Boneshaped wrench of steal, typical bicycle-tool from around 1920-1940, dark patina, supplying 10 different nut-sizes from 5-17mm deutsche Übersetzung | 8 € |
INo 8796 | 1920-1950 | Heavy adjustable wrench, British wrench, 31cm curved handle, opens 14 to 42mm, marked 'T.C.H. No2 Sheffield', engraved initials 'H-W' deutsche Übersetzung | 15 € |
INo 11698 | 1960-1960 | 'British Wrench', here as combination adjustable wrench and hammer, grip can be used as lever, around 1900/1910, stamped 'MHR B355', 24x6.6.5x2cm, dark patina deutsche Übersetzung | 15 € |
INo 12684 | 1960-1960 | 'British Wrench', here as combination adjustable wrench and tire tool, around 1920-1940, ideal for collectors of old-timer vehicles, length 24cm, good condition with some patina deutsche Übersetzung | 10 € |
INo 8167 | 1600-1900 | Big flat handcrafted open-end wrench for nuts with 4.8cm diameter, length 43xm, weight 650 g, dark patina deutsche Übersetzung | 10 € |
INo 8311 | 1900-1960 | Big double sided wrench, casted steel, sizes 32 and 35mm, length 37cm, weight 1300 g, dark surface, around 1900 - 1950 deutsche Übersetzung | 10 € |
INo 3778 | 1880-1920 | Adjustable open end British wrench, one side wrench other side hammer-head, flat iron grip with nut for adjusting, stamped 'Fahr B356', around 1910 deutsche Übersetzung | 10 € |
INo 3779 | 1880-1920 | 'French wrench', both sided, centre-screw split in upper and under part with opposite movement, turning grip tunes wrench size, around 1900 deutsche Übersetzung | 15 € |
INo 13646 | 1880-1920 | 'French wrench', both sided, centre-screw split in upper and under part with opposite movement, turning grip tunes wrench size, German made around 1920 deutsche Übersetzung | 15 € |
INo 7864 | 1880-1920 | Heavy 'French Wrench', adjustable wrench, turning the heavy grip moves the brackets of double-sided wrench, 32x11x3.2cm, 2.4kg, around 1900 deutsche Übersetzung | 20 € |
INo 8590 | 1920-1960 | Big iron open-end wrench Gedore 24/30, typical shape 1930/60, dark surface, 26cm, good condition deutsche Übersetzung | 8 € |
INo 15311 | 1942-1955 | German airforce air-engine service tools, 2 flat 12 point wrenches, came with service box for BMW Hornet engine, 'Gedore 24/27 (length 28cm) and no-name 22/24 (length 23cm), blued, good condition, no acceptance marks deutsche Übersetzung | 15 € |
INo 8280 | 1900-1960 | Big single side wrench of casted steel, size 41, length 34cm, weight 800gr, brown surface, around 1900/1950 deutsche Übersetzung | 20 € |
INo 8182 | 1900-1960 | Big triple sided open-end wrench, casted steel, marked in the cast 'KL236', one side 2.7cm, opposite side 2.3 and 1.7cm, length 25cm, 750g, dull steel, probably from mill around 1900/1950 deutsche Übersetzung | 10 € |
INo 2692 | 1700-1900 | Doppelseitiges verstellbares Anreißmaß aus Holz, Anschlagkanten mit Messing beschlagen, um 1900, Brandstempel 'KB12', guter gebrauchter Zustand, ca 10x2.5x19cm not yet translated into English | 22 € |
5 pieces available INo 12193 | 1940-1943 | Tool-tag of the workshop of the German airplant 'Mercur Flugzeugbau GmbH' Berlin, probably around 1940, possibly made of an emergency coin of the inflation time 1921-1923 by turning of face, zinc d=25mm deutsche Übersetzung | 10 € |
INo 14344 | 1957-1970 | German post WW2 Bundeswehr vehicle tool case, olive leatherette 31x19cm, 6 compartments for tools, empty, dated 1966, from motorbike ore jeep DKW Munga, good condition deutsche Übersetzung | 10 € |
2 pieces available INo 8367 | 1939-1945 | Toolcase of brown leather, German Army WW2, unused condition, about 15x11x3.5cm, flaps open on all four corners, underneath 6 loops for tools and/or parts, unused and very good condition deutsche Übersetzung | 15 € |
INo 8576 | 1800-1950 | Small old vice, with table clamp and small anvil plate, head 7x15cm, w=1.6kg deutsche Übersetzung | 20 € |
INo 3157 | 1700-1900 | Adjustable wooden marker, from a joiners shop around 1800, 5.7x5x19cm, good condition with traces of use deutsche Übersetzung | 25 € |
INo 1783 | 1700-1900 | Handcrafted pliers for cutting and drawing nails, around 17th/18th century, dark surface, good condition deutsche Übersetzung | 8 € |
INo 2711 | 1600-1950 | Einfacher Spindelbohrer für Holz, wahrscheinlich von Zimmermann zum Fachwerkhausbau, 13cm langer 23 mm Schälbohrer mit Spindel und 28cm langem Vierkantschaft, der oben in feuergeschweißter Tülle endet, handgeschmiedet, der Holzknebel erneuert, um 1900 not yet translated into English | 20 € |
INo 2668 | 1900-1950 | Simple drilling winch, crankshaft with 2-brackets chuck and wooden push-button on top and wooden grip in the middle, with traces of field grey military paint, so possibly German army WW1 and later used by a joiner or carpenter, 37x20cm, incl. a tip deutsche Übersetzung | 20 € |
INo 1268 | 1900-1960 | Small soldiering iron with 3cm copper head, iron stick with wooden handle, around 1920/30, 24cm, good condition with traces of use deutsche Übersetzung | 12 € |
INo 1577 | 1850-1950 | Small soldering-iron, thin iron-stick with wooden handle, front with 1cm thick and 5.5cm long copper-head with point, 32cm long, around 1900, from pipe-fitter-shop deutsche Übersetzung | 12 € |
INo 2673 | 1850-1950 | Medium size soldier iron, handcrafted conical copperhead with iron stick and turned wood grip, end of 19th century to 1930, 35x8.5x2.2cm, 500g deutsche Übersetzung | 15 € |
INo 2674 | 1850-1950 | Kleinerer Lötkolben, Eisenstab mit Holzgriff, Vorderseite durch einen senkrecht dazu stehenden keilförmigen flachen Kupferkolben geführt und eingenietet, Mitte 19.Jh., 29x6x1,7cm, 200gr. not yet translated into English | 15 € |
INo 2675 | 1850-1950 | Small soldiering iron, long iron stick with split tip, between the 2 arms of tip horizontal riveted in copper head, 42x2x2cm, 200 g, around 1880/1920 deutsche Übersetzung | 15 € |
INo 3018 | 1850-1950 | Small soldiering iron, thin iron rod with turned wooden grip, tip with angled copper head, 25x5.3x0.8cm, 87g deutsche Übersetzung | 15 € |
INo 1241 | 1850-1950 | Big bevel, opens like pocket knife, joiners tool to copy angles, around 1900, folded 38x4x2cm deutsche Übersetzung | 20 € |
INo 1423 | 1900-1920 | Screwdriver with wooden grip and flat blade, blade can be pulled out ands turned for different size tip, wood with tear, used condition, around 1910 deutsche Übersetzung | 10 € |
INo 2210 | 1700-1900 | Wooden C-clamp, from a joiners-shop around 1910, small issue, opens to 8cm, size 25x11x3.5cm, probably belonging to a tool-set deutsche Übersetzung | 15 € |
INo 1639 | 1880-1950 | Schweißbrenner/ Schneidbrenner aus der Zeit um 1900, zwei Messingrohre mit Schlauchtülle, daß obere vorn nach unten gebogen und das untere zugeführt, einfache Brennerdüse, mitten Drehhebel zur Gasregelung, guter Zustand not yet translated into English | 15 € |
INo 2438 | 1946-1970 | German folding rule, typical for the post WW2 period 1945-1950, of war trash aluminium , one side in inch, the other in cm, stamped 'Reinl. Norsk', used condition deutsche Übersetzung | 10 € |
|